Metrologic Instruments MS2421, MS2422 manual Installation, Unpacking The Unit

INSTALLATION

UNPACKING THE UNIT

1.Make sure the shipping box is top-side up before opening.

2.Remove the accessories box and check the box’s content for the following items.

•Product Manuals

•Power Supply

•Communication Cables

3.Lift the scanner out of the shipping box by gripping the bottom of the unit on both sides.

Important! Do not lift the unit out of the box by gripping the sides of the platter.

4.Carefully remove the shipping foam around the unit.

Important! Do not turn the unit upside down or tilt the unit onto its side while removing the shipping foam. The platter is not attached to the unit and can fall off!

5.Lift the platter off the unit and store it in a safe location until the unit is installed in the checkout counter.

Once the unit has been properly installed in the checkout counter, remove all protective film covering the platter’s horizontal window, the horizontal window under the platter on the unit base, and the vertical window. The unit will not function properly if the protective films are not removed.

Figure 13

Figure 14

Figure 15

Figure 16

13