SCANNER AND CABLE TERMINATIONS
SCALE READY MS2421 MODELS – ADDITIONAL PINOUT CONNECTIONS
There are four additional
Please keep in mind that every application is unique. The use of these connections depends on the specifications of the scale’s manufacturer. The following pinouts are for reference only. If the scanner has been integrated with a scale, refer to the Scale Addendum for detailed instructions on the appropriate cable connections, communication specifications and calibration procedures required by the scale manufacturer and local Weights and Measures authorities.
When connecting any combination of scale/external scale display to the M2421 do not exceed the following current restrictions: 12V @ 0.7A max. / 5V @ 0.2A max.
Figure 38. Scale Ready Connector Layout
Scale Display Data In Scale
Data to Display from the Load
Cell Interface
Pin | Function ** |
|
|
1SIG1
2SIG2
3SIG3
4SIG4
5SIG5
6SIG6
7SIG7 ††
8SIG8 ††
9SIG9 ††
10 SIG10 ††
Scale Data In
RS232 from the Load Cell
Interface
| Pin |
|
| Function** |
|
1 |
|
| 12V |
| |
2 |
|
| Ground |
| |
3 |
|
| 5V |
| |
4 |
|
| Ground |
| |
5 |
|
| RS232 TX In |
| |
6 |
|
| RS232 RX Out |
| |
7 |
|
| RS232 CTS In |
| |
8 |
|
| RS232 RTS Out |
| |
9 |
|
| Scale Status, TTL |
| |
10 |
|
| Scale Zero, TTL |
| |
Scale RS232 to Host
Scale Data, Dual Cable
Applications
Pin Function**
1Ground
2Scale RS232 TX Out
3Scale RS232 RX In
4Scale RS232 RTS Out
5Scale RS232 CTS In
6No Connect
7No Connect
8No Connect
9No Connect
10 Shield
|
| Scale to | |
|
| Display | |
|
|
|
|
| Pin |
| Function** |
|
|
|
|
1 |
| SIG1 | |
2 |
| SIG2 | |
3 |
| SIG3 | |
4 |
| SIG4 | |
5 |
| SIG5 | |
6 |
| SIG6 | |
7 |
| SIG7 †† | |
8 |
| SIG8 †† | |
9 |
| SIG9 †† | |
10 |
| SIG10 †† | |
**All signals are referenced from the MS2421/MS2422 scanner.
††The use of these pins depends upon the specifications of the scale’s manufacturer.
Specifications are subject to change without notice.
50
