SCANNER OPERATION

WAKE ACTIVATION AREA SENSITIVITY (PHOTOCELL LED OUTPUT RANGE)

Changing the Wake Area Sensitivity Level (Photocell LED Range Adjust)

The MS2400 Series bar code scanner wake area sensitivity level can be set to the end users preference by scanning one of the Photocell Sensitivity adjustment bar codes below.

* Maximum Photocell Sensitivity

This feature enables the MS24xx to be at Max sensitivity or far sensing for the wake up photo transistor.

* This is the default setting.

Medium Photocell Sensitivity

This feature enables the MS24xx to be at a medium 1 sensitivity or medium sensing for the wake up photo transistor.

Low Photocell Sensitivity

This feature enables the MS24xx to be at a low sensitivity or low sensing for the wake up photo transistor.

³ 2 2 1 2 2 0

Minimum Photocell Sensitivity

This feature enables the MS24xx to be at the lowest sensitivity (close only) for the wake up photo transistor.

³ 2 2 1 2 3 0

*MS2400 Series Bar Code Scanner Default Setting

28

Page 31 Page 33
Page 32
Image 32
Metrologic Instruments MS2422, MS2421 manual Wake Activation Area Sensitivity Photocell LED Output Range
Page 31 Page 33
Top Page Image Contents