Metrologic Instruments MS2421, MS2422 manual Changing the Beeper Tone, Changing the Beeper Volume

SCANNER OPERATION

BEEPER OPTIONS AND BUTTON FUNCTIONS

Changing the Beeper Tone

Beeper tones may be configured incrementally using the following bar code. The new tone will be heard followed by a short pause. Two more new tones will be heard signifying the new setting has been stored in memory. The silent (no beep) tone is also selectable.

Next Beep Tone

³9 9 9 9 7 5

Changing the Beeper Volume

Volume levels may be configured using the volume button or incrementally using the following bar code. The new volume will be heard followed by a short pause. Two more tones will be heard signifying the new setting has been saved in memory. The silent (no volume) tone is also selectable.

Next Volume

³ 9 9 9 9

7 4

The Multi-Function Button

Figure 33. Changing the Beeper Volume

Figure 34. Laser & Motor Off Power

Save Mode

Figure 32. The Multi-Function Button

Changing the Beeper Volume

A short (<3 second) depression and the beeper volume will change.

The new volume will be heard. The silent (no beep) volume is also selectable.

Placing the Unit in Laser & Motor Off Power Save Mode

Long (>3 seconds) depression The Laser & Motor Off Power Save Mode is the only power save mode that can be activated with the multi-function button*.

*This feature is configuration dependent. Refer to the MetroSelect Configuration Guide (MLPN 00-02407x) under Scanner Operation: Power Save Modes to enable this feature.

Waking the Unit from All Power Save Modes

The next button depression will awaken the scanner for normal operation.

Figure 35. Normal Operation

35