Metrologic Instruments MS2422 See caution statement on page, Introduction, General Precautions

INTRODUCTION

GENERAL PRECAUTIONS

The following are some general precautions to remember when handling the MS2421/MS2422 scanner.

DO NOT TURN the unit upside down with the platter in place.

Figure 1

DO NOT PRESS on the window in the platter or the vertical window frame.

PLATTER REMOVAL

No hardware or tools are required to remove the platter

(see Figure 3). Refer to the Maintenance section of this manual for additional information on platter replacement.

See caution statement on page 3.

FINGER RECESSES

There are two finger recess areas provided to assist when lifting the

MS2421/MS2422 scanner. REST both thumbs against the vertical window frame for added stability when lifting the unit by the finger recesses.

Figure 2

Figure 3

Figure 4

4