BEFORE INSTALLING YOUR MS7600

When mounting the MS7600 or replacing the Top Plate:

DO NOT Turn

Figure 1

the unit upside down.

 

DO NOT Press

Figure 2

on the window.

 

Lift the Top plate straight up to remove.

There is no hardware required to remove or replace the top cover.

See caution on page 3.

There are two installation tabs under the top cover that can be used to place the unit into the counter top mounting hole.

DO NOT PRESS on the window in the replacement Top plate.

Figure 3

Figure 4

4

Page 7
Image 7
Metrologic Instruments MS7620 manual N OT Press, Before Installing Your MS7600