Metz 40 TK 81 manual Using the TV Menu, Saving changes

• Satellite receiver

☞Switch on your satellite receiver and press the AV key on the remote control to switch on the monitor. Note that you may have to press the AV key several times, depending on the SCART socket to which your receiver is connected.

• PC

☞Switch on the monitor by pressing the PC key on the remote control and then select the appropriate signal input ( PC(RGB) or PC(DVI)). To do this, press the MENU key on the remote control to open the TV menu of the monitor and select the desired input signal in the sub- menu INPUTS > SOURCE.

		RK 14
		￿
TV	AV	PC
–/––	F	M/S

RK 14

￿

TV AV PC

–/–– F M/S

4.4 Using the TV Menu

You can set up and operate your TFT monitor with the aid of the simple menu control system. This is done with six keys on the remote control:

M

Mkey

Saves any changes you have made.

P - key

Moves upwards in the TV menu. The selected sub-menu or function is marked with a different coloured background. If functions are displayed as values or bars, you can increase the value with this key.

P - key

Back to the previous menu. Exit from the currently selected sub-menu or function.

MENU - key

Opens the TV menu. The main menu is displayed at the top left corner of the screen. Pressing the MENU key again closes the TV menu.

P - key

Activates the selected sub-menu or function. The selected menu item is displayed on a green background and can be changed.

P - key

Moves downwards in the TV menu. The selected sub-menu or function is marked with a different coloured background. If functions are displayed as values or bars, you can decrease the value with this key.

Saving changes

Any changes you have made in the TV menu are saved by pressing the M key on the remote control (see picture above) or by closing the TV menu.

15