83
ķ
11 Modelling Light (ML)
The modelling light (setting light) is a
high frequency, stroboscopic flash
light. The effect of a quasi continuous
light is created for a duration of
approx. 2 seconds. The setting light
can be used to assess the light distri-
bution and shadow formation before
taking a picture.
Activating the modelling light
• Switch-on flash unit with the main
switch .
• Keep the button “AF/SELECT”
pressed until the following message
appears in the display:
• Press the button on the flash
unit. In the display appears:
• Switch-on (ON) the “MODELLING
LIGHT” function with the button
•
Press button and the “Modelling
Light” function is switched to the
preset operating mode.
OK
SEL
• As a confirmation that the
“Modelling Light” is switched on,
the manual release button blinks.
Triggering modelling light
Press the manual release button to
trigger the modelling light.
The modelling light is generated
according to the possibly set ratio of
the reflectors (Ratio).
Deactivating modelling light
• Keep the button “AF/SELECT”
pressed until the following message
appears in the display:
• Press the button on the flash
unit. In the display appears:
• Switch-off (OFF) the “MODELLING
LIGHT” function with the button
.
• Press the button and the model-
ling light function is deactivated.
OK
SEL
SEL
SELECT
⊃
15MS-1 V1.0
SEL
OK
MODELLING
LIGHT
OFF ON
SEL
OK
MODELLING
LIGHT
OFF ON
☛
SEL
SELECT
⊃
SEL
OK
MODELLING
LIGHT
OFF ON
SEL
OK
MODELLING
LIGHT
OFF ON
708 47 0018-A1 MB 15 MS-1 20.10.2008 11:52 Uhr Seite 83