Settings on the flash unit

 

 

• Set on the flash unit the flash mode TTL or EM

￿

(EM = EASY-MODE-TTL; only with 40 MZ... and

 

50 MZ-5).

 

 

 

Settings on the SCA adapter

 

 

• The position of switch

is irrelevant.

 

• Set switch

in position NORM.

 

4.2 Flash readiness indication on the camera

 

The flash ready symbol

lights up on the flash

 

unit when the flash capacitor is charged, thereby

 

indicating that flash readiness is established and

 

that a flash can be fired for the next shot. Flash

 

readiness is also transmitted to the camera for a

 

corresponding information on the display or in the

 

viewfinder (see camera manual).

 

If a picture is shot before flash readiness is indi- cated then the flash unit will not be triggered so that the exposure may be incorrect.

Orange LED or flash symbol flashes in the camera viewfinder

Command to switch on or use the flash unit.

Wait for flash readiness to be indicated when the flash unit is switched on.

Orange LED or flash symbol is illuminated

The flash unit is ready for firing.

Depending on the type of camera used the indications given on the camera may differ from the above examples. Therefore, please refer to the individual camera manual.

19

Page 19
Image 19
Metz SCA 3202-M manual Settings on the SCA adapter