Metz SCA 3202-M manual View of the SCA adapter, Sensor, Switch, Position is irrelevant

slave mode of the SCA adapter (switch in SL position) always operates with metering pre- flash suppression, the camera’s “SLAVE” mode must NOT be activated!

To work in the “SLAVE” camera setting the slave flash unit must be equipped with the SCA 301 standard foot. Additionally use the mecalux 11 (optional accessory) as a slave triggering unit for the flashgun.

1.1 View of the SCA adapter

Front view

Sensor

Rear view

☞The switches and the display are located behind a flap on the back of the adapter. This flap can be opened with the fingernail.

Switch :

AB: Reserved for future applications. The switch

position is irrelevant!

8