Metz SCA 3202-M manual Dedicated flash mode, Display in slave flash mode

Switch	:
Operating mode selector:		￿
NORM position: Dedicated flash mode
SL position: Slave flash mode
Display	in dedicated flash mode:

• In dedicated flash mode the display lights in green if the flash mode TTL, Automatic A or Manual M set on the flash unit is supported. With some camera/flash unit combinations there are limitations regarding TTL flash mode. The display flashes in green as a warning (see Section 3.1).

If the master flash function (controller) is activa- ted on the flash unit in TTL mode, then the dis- play of the SCA adapter will start to flash as a warning (see Section 5).

•With some flash units (45 CL–4 and 60 CT4) auto working aperture setting on the flash unit by the camera is not possible for technical reasons. This means that the camera modes program P and shutter priority S are not supported in the auto flash mode A and the manual flash mode M (see

Table 2). The display flashes in green as a warning in the camera modes P and S.

Display in slave flash mode:

• The display lights in red when in slave mode if the flash modes Auto A or Manual M are set on the flash unit.

• The display flashes in red in slave mode as a warning when the TTL flash mode has been set on the flash unit (see Section 6).

9