Introduction
Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment.
The Pulsar MX range has been designed with the utmost care.
We recommended that you take the time to read this manual to take full advantage of the many features of your UPS (Uninterruptible Power System)
Warning: this is a class A UPS product. In a domestic environment, this product may cause radio interference, in wich case, the user may be required to take additional measures.
Output cables should not be longer than 10 meters.
If the device must be installed in overvoltage category III or IV envoronments, additional upstream overvoltage protection must be provided for.
Before installing Pulsar MX, please read the booklet on the required safety instructions. Then follow the indications in this manual.
To discover the entire range of MGE UPS SYSTEMS products and the options available for the Pulsar MX range, we invite you to visit our web site at www.mgeups.com or contact your MGE UPS SYSTEMS representative.
Environmental protection
MGE UPS SYSTEMS has implemented an
Products are developed according to an
Substances
This product does not contain CFCs, HCFCs or asbestos.
Packing
To improve waste treatment and facilitate recycling, separate the various packing components.
◗The cardboard we use comprises over 50% of recycled cardboard.
◗Sacks and bags are made of polyethylene.
◗ Packing materials are recyclable and bear the appropriate identification symbol | . |
|
| ||
|
|
|
|
|
|
Material | Abbreviation |
| Symbol |
|
|
|
|
| number |
|
|
|
|
|
|
|
|
Polyethylene terephthalate | PET |
| 01 |
|
|
|
|
|
|
|
|
HDPE |
| 02 |
|
| |
|
|
|
|
|
|
Polyvinyl chloride | PVC |
| 03 |
|
|
|
|
|
|
|
|
LDPE |
| 04 |
|
| |
|
|
|
|
|
|
Polypropylene | PP |
| 05 |
|
|
|
|
|
|
|
|
Polystyrene | PS |
| 06 |
|
|
|
|
|
|
|
|
Follow all local regulations for the disposal of packing materials.
End of life
MGE UPS SYSTEMS will process products at the end of their service life in compliance with local regulations.
MGE UPS SYSTEMS works with companies in charge of collecting and eliminating our products at the end of their service life.
◗Product
The product is made up of recyclable materials.
Dismantling and destruction must take place in compliance with all local regulations concerning waste.
At the end of its service life, the product must be transported to a processing centre for electrical and electronic waste.
◗Battery
The product contains
The battery may be removed to comply with regulations and in view of correct disposal. The "Material Safety Data Sheets" (MSDS) for the batteries are available on our web site*.
(*)For more information or to contact the Product Environmental manager, use the "Environmental Form" on the site: www.mgeups.com
