3. Operation

3.3Operation on battery power (following failure of AC-input power)

Transfer to battery power

The AC-input power is out of tolerances, LED 11 goes ON.

During operation on battery power, the buzzer beeps every ten seconds.

The equipment connected to the UPS is supplied by the battery.

11

1 2

%

%

Threshold for the low-battery warning

11

1 2

%

%

When the threshold is reached, the buzzer beeps every three seconds. The low-battery warning threshold can be set by the user, with the ÒUPS DriverÓ software.

There is very little remaining battery backup time. Close all applications because UPS automatic shutdown is imminent.

When the battery reaches the end of its backup time, the UPS shuts down and all the LEDs go OFF.

The equipment is no longer supplied with power.

The UPS automatically restarts when power returns.

If the UPS does not restart, check that the Òautomatic restart when power returnsÓ function has not been disabled (see section 3.4 Personalisation).

34007117EN/AB - Page 19

Page 20
Image 20
MGE UPS Systems 800 Rack, 1500 Rack, 1100 Rack Transfer to battery power, Threshold for the low-battery warning