MGE UPS Systems 1500 Rack, 800 Rack Personalisation optional, Function, On / OFF conditions tab

3. Operation

3.4 Personalisation (optional)

Function

Personalisation parameters can be set and modified using the UPS Driver software installed on a computer that is connected to the UPS (see section 2.4 Connection to the RS232 communications port).

Check that the RS232 21 communications cable is connected.

UPS Driver installation:

1 - Insert the Solution-Pac CD-ROM containing the UPS Driver software in the drive of a PC running Windows. 2 - Open the Windows File manager or Explorer and select the CD-ROM drive.

3 - Double-click "\Emb\Evolutio\Config\upsdriv.exe".

Once UPS Driver has been installed, UPS parameters can be modified in a window containing a number of tabs, each presenting a set of parameters :

ON / OFF conditions tab

Configurable function	Default setting	Options
Automatic restart	Enabled	Disabled
Cold start	Enabled	Disabled
Forced reboot	Enabled	Disabled
Energy saving	Disabled	Enabled
UPS ON / OFF via software	Enabled	Disabled

Battery tab

Configurable function	Default setting	Options
		Every day
Interval between automatic battery tests	Once a week	Once a month
		No test
Low-battery warning threshold	20% of the remaining battery	10 to 40% of the remaining battery
	backup time	backup time
Protection against deep discharges	Enabled	Disabled

Page 20 - 34007117EN/AB