4- RAID Manager Software
3.4 Button Backup
The Micronet RAIDBank5 RAID subsystem supports user triggered backup, triggered by the “Set/ Mute/Backup” button on the back of the unit (see page 9 for button location illustration.) Once configured, the button will trigger the configured task.
Your RAIDBank5 may arrive with bundled backup software. If you’d like to use the button to trigger this software (or another program of your choosing) make sure it is installed before configuring the button task. In the button
configuration screen, enter the program filename including full path (you may use the 
button to locate the program) and the command line arguments as applicable in the “Program Arguments” field.
PCClone EX utilizes a simple syntax for command line arguments. The argument “/filesbackup:X” (where “X” is the drive letter of the target drive) will launch a backup to the specified target volume.
4. Advanced Mode
Advanced mode provides interface to the more advanced features of the RAID subsystem. In this mode there are five function tags in the function pane: Email Notification and Event Settings, Advanced RAID Configuration, Firmware Control, RAID power and rebuild settings, and Encryption Control.
4.1 Remote Notification
The RAIDBank5 features an SMTP manager, and can send email notifications for various RAIDBank5 conditions.The following subsections discuss each attribute’s descriptions. When all desired options are entered,
click 
to finalize or 
to undo selection.
4.1.1 SMTP Server IP address
The SMTP (Simple Mail Transport Protocol) server is an external server that relays your network’s
outgoing mail. | Enter | your |
network’s SMTP server’s network IP address and port in these fields. If you do not know your | ||
SMTP server’s IP address or server port, consult your network administrator. | ||
RAIDBank5 Owner’s Manual | 24 | |
