All access points with WPS function enabled will be displayed here. Please make sure the access point users wish to connect is displayed. If not, please click ‘Rescan’ few more times. The user can also click ‘Information’ button to see the detailed information about selected access point.
Step 3. Start PBC pairing procedure at access point side (please refer to the instruction given by your access point’s manufacturer), then click ‘PBC’ button in wireless configuration utility to start to establish wireless connection by WPS. Please be patient as this may require several seconds to one minute to complete. When users see ‘WPS status is connected successfully’ message, means the connection between this wireless network card and access point is successful.
Users can click ‘Detail’ button to see further information of connected access point. If users wish to save this connection as a profile, they can click ‘Export Profile’ button, and this connection will be saved. Users can find this connection in ‘Profile’ tab in a later time.
Sometime WPS may fail (In the following picture, WPS pairing is failed because no
29
