Middleby Marshall PS360WB Support Brackets Lower Oven 20”, Support Brackets Upper Oven

SECTION 2

INSTALLATION

2.Align the two center ovens so that they are level and 20” (508mm) apart. Then, attach the two angled support brackets between the two center ovens, as shown in Figures 2-14 and 2-15.

Note that a LOWER OVEN uses different support brackets for the front and rear, while an UPPER OVEN uses identical brackets on the front and rear.

Figure 2-14

Support Brackets,

Lower Oven 20”

508mm

Upper surfaces of

brackets must be level

with each other

Figure 2-15

Support Brackets,

Upper Oven

20”

508mm

4.Place the transition floor panel into place atop the support brackets. See Figure 2-16.

5.Install the transition (center) conveyor section, as shown in Figure 2-17. Align the conveyor section so that it extends the same distance into the two oven chambers.

Figure 2-16

Floor Panel

Installation

Figure 2-17

Installing

the Frame

2-8