SECTION 2
INSTALLATION
2.Slide the conveyor belt through the support rods underneath the frame, and thread it through the oven. Then, reach through the oven window and pull the free end of the belt through the oven so that it lies atop the conveyor frame.
After the belt has been pulled through the oven, check the following:
•The conveyor belt links must be oriented as shown in Figure
•The smooth side of the conveyor belt must face UP.
3.Connect the inside master links. Check that the links are oriented as shown in Figure
Direction of travel
Figure 2-21 - Conveyor Link Orientation
Incorrect | Correct |
position | position |
Figure 2-22 - Inside Master Links
4.Connect the outside master links. Note that the outside master links have right and left sides. The
Direction
of travel
Figure
Outside Master
Links