Middleby Marshall PS360-L Operation, I. Location And Description Of Controls, Not Shown, English

SECTION 3 - OPERATION

I.LOCATION AND DESCRIPTION OF CONTROLS

Fig. 3-1 - Control Panel

E.

Conveyor Speed

("") controller(s)

ENGLISH

	D.	A.	B.		C.	F.
		"BLOWER"	"HEAT"	"CONVEYOR"		Digital Temperature
	"RESET"	(" ")	(" ")	("	")	(" ") controller
(	) switch	switch	switch	switch

GAS OVENS ONLY

A."BLOWER" Switch: Turns the blowers and cooling fans on and off. The HEAT Switch has no effect unless the BLOWER Switch is in the “ON” position.

B. "HEAT" Switch: Allows the burner or heating

elements, as appropriate for the oven model, to activate. Activation is determined by the set- tings on the Digital Temperature Controller.

C. "CONVEYOR" Switch: Turns the conveyor drive motor on and off.

D."RESET" Switch: Gas ovens only. Illuminates

if the gas burner does not light. The switch can be pressed repeatedly to attempt to light the burner. If the burner does not light within 15 minutes, the "RESET" ( ) switch is locked out.

E.Conveyor Speed Controller: Adjusts and dis- plays the bake time. Single-belt ovens have one controller. Split belt ovens have one controller for each conveyor belt, labeled "FRONT" and "BACK."

F.Digital Temperature Controller: Continuously monitors the oven temperature. Settings on the Digital Temperture Controller control the acti- vation of the burner or heating elements.

NOT SHOWN:

G.Machinery Compartment Access Panel Safety Switch: Disconnects electrical power to the controls and the blow- ers when the machinery compartment access panel is opened. The panel should only be opened by authorized service personnel.

15