Cleaning and care

Maintenance

The perforator should be changed after 15,000 cups of coffee / espresso. The perforator can be purchased from Miele.

It is recommended to contact the Miele Service department for assistance in performing this maintenance task.

Settings F

 

 

 

^ Insert the tool (supplied) up into the

 

 

 

 

unit, a. Turn it to the left, b, to

 

 

 

 

 

 

K1 K2 K3 K4 K5 L o n G

k

C

 

 

 

loosen and remove the perforator

^ Select "Settings F" from the main

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

menu. Confirm with OK.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

^ Tap < or > until "Maintenance" is highlighted. Confirm with OK.

^ Select "Carry out". Confirm with OK.

The appliance is now lowers the perforator. The display then reads:

i Remove capsule plate and change the capsule hopper

^Open the appliance door.

^Pull the capsule plate out.

Do not reach up into the perforator opening. Danger of injury!

^Screw the new perforator firmly into the unit. The spring and ball must be inserted in the perforator opening so that the ball is on top.

^Insert the rubber connector from the bottom up (with the funnel pointing downwards).

^Insert the capsule plate and close the door.

^Pull the rubber connector down and out.

45

Page 45
Image 45
Miele CVA 2652 installation instructions Maintenance, Select Settings F from the main Menu. Confirm with OK