Miele CVA 3650 installation instructions Setting Automatic rinsing, Setting the Steam system

Settings: Customising your machine

Setting Automatic rinsing

To remove any coffee grounds from the system, the water piping must be rinsed through before the first drink of the day is prepared. If Automatic rinsing is selected, the rinse cycle will take place automatically whilst the machine is still cold when the machine is switched on. This will also pre-heat the system because hot water is used for the rinse process. A message will appear in the display to let you know what is happening. The machine will also run an automatic rinse before it switches off, if it has been used to prepare a drink.

The machine is delivered with the Automatic rinsing option set to "On".

To prevent water from running into the drip tray, always place an empty cup

under the spout before making the first drink.

^Select "Settings F" from the main menu, and then touch the OK sensor.

^Touch the right arrow sensor until "Automatic rinsing" is highlighted and touch the OK sensor.

^Touch one of the arrow sensors to select "On" or "Off" and touch the OK sensor.

It is a good idea to set this option to "On" so that the rinse process cannot be

forgotten.

Setting the Steam system

The machine has two heating systems which allow you to dispense steam and coffee at the same time. To save energy, the steam system can be switched off if steam is not required all the time.

When the steam system is switched off, the machine can still be used to make

steam, but not at the same time as making coffee or espresso.

If you operate the steam valve when the steam system is switched off, the machine will not produce steam until it has heated itself up.

The steam heating system remains active as long as the machine is still on.

^Select "Settings F" from the main menu, and then touch the OK sensor.

^Touch the right arrow sensor until "Steam system" is highlighted, and then touch the OK sensor.

^Touch one of the arrow sensors to select "On" or "Off" and touch the OK sensor.

28