Electrical connection U.K., ZA, IRL
All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK).
Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
Ensure power is not supplied to the machine until after installation work has been carried out.
The voltage and connected load are given on the data plate. Please ensure these match the household mains supply. The fuse rating is quoted on the plug.
The machine is supplied with a mains cable with moulded plug for connection to a 230 - 240 V mains supply.
Connection should be made via a fused plug and suitable switched socket which is easily accessible after installation.
Do not connect via an extension lead.
For extra safety it is advisable to install a suitable residual current device (RCD). Contact a qualified electrician for advice.
If the socket is not accessible after installation (depending on country) an additional means of disconnection must be provided for all poles.
WARNING: THIS APPLIANCE MUST BE EARTHED
Non-rewireable plugs BS 1363
The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).
Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.
63
