Miele CVA 3650 installation instructions Cappuccinatore milk frother, Cleaning and care

Models: CVA 3650

1 68
Download 68 pages 26.63 Kb
Page 48
Image 48
Cappuccinatore (milk frother)

Cleaning and care

Cappuccinatore (milk frother)

The cappuccinatore can be dismantled into several parts to clean it properly. It is very important to clean the parts thoroughly as otherwise the froth will not be produced properly, if at all. It is best to clean the cappuccinatore in a dishwasher - all parts are dishwasher- safe.

^Dismantle the cappuccinatore lid and clean all the parts.

You will not be able to pull the valve out if the dot is set between the symbols for hot milk and steam.

^Reassemble the parts of the lid as shown. In order to insert the valve correctly the dot on the valve must be at the top right-hand side.

Ensure that all parts have been reassembled correctly and that there is no gap between the two parts of the lid.

Also make sure that the reassembled lid is fitted onto the cappuccinatore jug correctly. The valve sits above the cappuccinatore handle. If this is not the case, the cappuccinatore will not operate properly.

48

Page 48
Image 48
Miele CVA 3650 installation instructions Cappuccinatore milk frother, Cleaning and care