Making drinks
Important: the water piping must be rinsed through every day and the machine cleaned thoroughly before the first drink of the day is prepared. Rinsing will take place automatically if the Rinsing programme option has been set to "On" and the machine is cold. Hot water will run out of the spout into the drip tray once the machine has heated up.
If the Rinsing programme option has been set to "Off", select "Rinsing" in the display to rinse out the system (see "Cleaning and care").
Switching on
^Touch the On/Off sensor s.
The following message will then appear:
If the automatic Rinsing programme option has been set to "On" (factory default setting), the following will appear after the machine has heated up:
Rinsing
Water will run out of the spout.
You will hear the capsule carousel moving into position.
The main menu will then appear in the display:
COSIo Espresso
K1 K2 K3 K 4 K5 L o n G k C
Before preparing the first drink
Filling the system with water
The machine is emptied completely before it leaves the factory. You must allow water to be pumped through the system before the first drink of coffee or hot water is prepared.
Hot water
K1 K2 K3 K 4 K5 L o n G k C
^Select "Hot water" with one of the arrow sensors.
^Touch the OK sensor.
^Run some hot water into the cup.
^Touch the OK sensor again to switch the water off.
The system is now filled with water, and the machine is ready to use.
Preparing espresso and coffee
^Place a cup under the spout.
COSIo Espresso
K1 K2 K3 K 4 K5 L o n G k C
^Select the type of coffee with one of the arrow sensors.
^Use the drink selection sensor to select espresso or coffee.
The type of coffee you have chosen will appear in the top line of the display on the right.
17
