Programming the amount (Setting the portion sizes)
The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. Not all espresso and coffee cups are the same size. To ensure the machine uses the right amount of water to suit your taste and your cups, you can programme the amount to use.
The drinks selection symbols are designed for the following:
The Espresso symbol dispenses a standard size espresso to be served in a standard espresso cup.
The Coffee symbol dispenses coffee for a standard size coffee cup.
You can programme the amount in two ways, either by touching the OK sensor continually, or via the "Settings" option.
Espresso and coffee for all chambers and types of coffee will
be dispensed using the amounts programmed regardless of which chamber or which type of coffee you select for carrying out the programming the amount procedure.
Programming the portion size via the OK sensor
^Place the appropriate cup for the amount you want to programme under the coffee spout.
^Select the type of drink you require.
^Touch the OK sensor until "Prog. the amount" appears in the display.
^As soon as the cup is filled to the level you want, touch the OK sensor again to save the amount to memory.
The volume of water programmed in will now be dispensed every time this drink (coffee or espresso) is selected, regardless of the type of coffee chamber selected.
Water flow stops automatically when the maximum amount possible is reached. The maximum amount possible for that type of drink will be saved.
If there is insufficient water in the water container, the process will be stopped and the amount will not be saved.
37
