CD Mielabor | Miele G 7783 CD instruction

Operating Instructions for

Compact Disinfector

G 7783 CD MIELABOR

Laboratory Glasswasher

It is essential to read these Operating Instructions before installing or using the machine, to avoid the risk of accident, or damage to the machine.

Q

M.-Nr. 04 195 811

Image 1

Miele G 7783 CD operating instructions CD Mielabor

Contents

CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Disposal of an old machine Accessories Available at extra cost Description of the machine Setting the WaterSoftener Setting the water softener Reactivating the water softener, see To open the door a Opening and closing the doorTo close the door Loading the machine Applications and loadingRemoving excess soils Loading example 109 Top basket frame can take various inserts106 To adjust the top basket Adjusting the top basket Rinsing agent Setting the dosageAdding Rinsing agent Refilling with rinsing agent Adding neutralising agent Adding neutralising agent and liquid detergentAdding detergents Venting the liquid dispensing system Venting the liquid dispensing system / MaintenanceChecking the dispensing system Adding powder detergent Adding detergent Programme B, and when using O-175 or a pipette plateProgramme selection = Cold Programme chart Instructions for the operator 7783 CDPage Page Accessories 93C 70C Selecting a programme Switching the machine on and offSelecting an additional pro- gramme Programme Changes Switching the machine on and off Switching off Programme sequence indicatorInterrupting a programme 1b. Hot water connection 1a. Cold water connection1c. AD water connection Programming special functions Filling the salt container Reactivating the water softener Position the salt container as follows Switch on the machine Cleaning the filters in the water cabinet Cleaning and careCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Cleaning the filters in the water inlet Changing the Coarse Filter Drying unit TA cleaning and careExchanging the S-class particle filter Faults/Possible Causes Correcting minor faultsMachine does not start Important for machines with DHK steam condensor InstallationPosition and secure the machine Cover plate worktop protection Electrical connection To remove service panel and cover plate Electrical connection Connection to the water inlet Plumbing Connection to purified water non- pressurised 0 1.5 bar AD connection to purified water, pressurised, 1.5 10 bar Ventilation of the wash cabinet at rear Drainage Disposal of the packing material Caring for the environmentDisposal of your old machine Noise emission in dB a Technical Data