Setting the water softener
To avoid the build-up of calcium de-
posits on glassware and in the machine
the water needs to be softened, where
the supply hardness exceeds 107
ppm, (6°d).
To ensure a steady supply of soft water
the water softener unit must always be:
1. correctly set
2. reactivated with "dishwasher" salt as
soon as the k indicator light comes on.
The water softener must be set to corre-
spond with the water hardness the first
time the machine is used.
Your local water authority will advise
you on the water hardness in your area.

Setting the WaterSoftener

The hardness range is divided into 18
"time" units ad a zero position. The ma-
chine is set at the factory, correspond-
ing to 339 ppm, (19°d).
If your water supply is harder or softer
than this, then:
Use the touch pads on the control
panel to change the time setting (see
Tabl e).
Time
unit °d mmol/
l
° f °e ppm
CaCO3
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
6
7
8
9
10
11
12
13
15
17
19
22
24
28
32
38
48
71
1.07
1.25
1.42
1.60
1.78
1.96
2.14
2.31
2.67
3.03
3.38
3.92
4.27
4.98
5.70
6.76
8.54
12.64
10.7
12.5
14.3
16.0
17.9
19.6
21.4
23.2
26.8
30.4
33.9
39.3
42.8
50.0
57.1
67.8
85.7
126.7
7.5
8.8
10,0
11.3
12.5
13.8
15.0
16.3
18.8
21.3
23.8
27.5
30.0
35.0
40.0
47.6
60.1
88.9
107
125
143
160
179
196
214
232
268
304
339
393
428
500
571
678
857
1267
Press T1 and c touch pads simul-
taneously and, whilst depressed,
switch the machine on, using the
main switch "I-0".
"P..." will appear in the display field (to
indicate current programming status).
Press touch pad k. The "P" will dis-
appear and setting "0" will appear in
the display field. This setting "0" can
now be changed if necessary. To do
this:
Press touch pad cas many times
as is necessary for the desired value
to appear in the display field.
Press touch padh. "SP" appears.
Press h once more. The setting will
now be stored. The display field
clears.
The machine is now ready for oper-
ation.
Setting the water softener
10