Drying unit (TA) cleaning and care
Changing the Coarse Filter
The coarse filter should be changed
when it is soiled or after approx. 100
operating hours, (see time counter on
the TA unit).
Grip the inlet grille to the right and
the left and pull up out of the re-
tainers and then downwards and off.
Take out the perforated plate.
Change the coarse filter.
- The smooth side of the filter must
face the rear.
Position the perforated plate at the
base and press into place at the top.
- The edge surround should face for-
ward.
When putting back the inlet grille, it
should audibly click into place.
Exchanging the S-class particle
filter
If is advisable for this filter to be re-
placed after approx. 500 operating
hours (see the time counter on the TA
control unit).
This filter should only be changed by
an authorised Service Dealer or the
MIELE Service department.
The effective operating of the machine
can only be achieved if original "Miele"
S - class particle filters are used.
Drying unit (TA) cleaning and care33