93C 70C | Miele G 7783 CD specification

			Programme cycle							Miscellaneous

1.	2.	3.		4.	5.		6.	7.	8.
Prelimi-	Prewash	Main		Interim	Interim		Interim	Final	Drying	*) see
nary pre-	II	wash &		rinse I	rinse		rinse	rinse	phase	"Programming
wash		possibly		and	II		III		(extra	special functions"
		thermal		possibly					prog)
		disin-		neutral-
		fection		isation*)

X

		X		X	X			X	(X)	**) Increase in
		93°C						70°C		temp. holding time
		**)						AD		see "Special
		**)						AD		functions".
										functions".

	X	X		X	X			X	(X)
		60°C						60°C

		X		X	X		X	X	(X)
		85°C					AD	70°C
								AD

X		X		X	X		X	X	(X)
		85°C					AD	70°C
								AD

X	X	X		X	X		X	X	(X)
		85°C			AD		AD	70°C
								AD

AD (Aqua destillata) = purified water, "H2O", (distilled, R.O., or de-ionised).

X = sections included in standard programmes

23

Image 27

Miele G 7783 CD operating instructions 93C 70C

Contents

CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Disposal of an old machine Accessories Available at extra cost Description of the machine Setting the WaterSoftener Setting the water softener Reactivating the water softener, see Opening and closing the door To open the door aTo close the door Applications and loading Loading the machineRemoving excess soils Loading example Top basket frame can take various inserts 109106 To adjust the top basket Adjusting the top basket Refilling with rinsing agent Setting the dosageRinsing agent Adding Rinsing agent Adding neutralising agent and liquid detergent Adding neutralising agentAdding detergents Venting the liquid dispensing system / Maintenance Venting the liquid dispensing systemChecking the dispensing system Adding powder detergent Programme B, and when using O-175 or a pipette plate Adding detergentProgramme selection = Cold Programme chart Instructions for the operator 7783 CDPage Page Accessories 93C 70C Programme Changes Switching the machine on and offSelecting a programme Selecting an additional pro- gramme Switching the machine on and off Programme sequence indicator Switching offInterrupting a programme 1a. Cold water connection 1b. Hot water connection1c. AD water connection Programming special functions Filling the salt container Reactivating the water softener Position the salt container as follows Switch on the machine Cleaning the fine, flat and micro-fine filters Cleaning and careCleaning the filters in the water cabinet Cleaning the coarse filter Cleaning the filters in the water inlet Drying unit TA cleaning and care Changing the Coarse FilterExchanging the S-class particle filter Correcting minor faults Faults/Possible CausesMachine does not start Installation Important for machines with DHK steam condensorPosition and secure the machine Cover plate worktop protection Electrical connection To remove service panel and cover plate Electrical connection Connection to the water inlet Plumbing Connection to purified water non- pressurised 0 1.5 bar AD connection to purified water, pressurised, 1.5 10 bar Ventilation of the wash cabinet at rear Drainage Caring for the environment Disposal of the packing materialDisposal of your old machine Noise emission in dB a Technical Data