Water softener softener (Optional)
Run the reactivation programme
Close the door.
Open the stopcocks.
Select the REACTIVATION programme.
The programme will run automatically.
Then:
Switch off the machine.
Carefully unscrew the salt container, making sure any water pressure still remaining can depressurise. Do not use force!
If the container will not come off manually please contact the Miele Service Department.
Replace the plastic cap.
Push the mobile unit back into the cabinet.
Turn off the stopcocks.
Empty the salt container. Do not empty it into the wash cabinet.
Rinse the salt container and filter insert with clean water.
The water pressure (flow pressure at the take off point) must be at least 100 kPa (1 bar).
If it is below100 kPa (1 bar) or if it fluctuates a lot, the water softener will not work properly. After reactivation, salt remains may still be found in the salt container.
To use up salt remains and to rinse out the water softener, the REACTIVATION programme must be carried out again.
18
