Automatic mobile unit recognition Optional | Miele G 7823, G 7824

Automatic mobile unit recognition (Optional)

In operating level C the automatic mobile unit recognition system (AWK) allocates programme places from 1 - 15 to mobile units with the correct coding.

The unit coding (on the mobile unit) and the programme place with the corresponding programme (in the electronic control unit) have to match each other.

To do this:

Each mobile unit must be coded before being used for the first time (see "Coding the mobile unit"), and

The programme for which the mobile unit is coded must be allocated to the correct programme place.

See "System function - Selector switch organisation" in the Programming manual for information on how to change programme positions.

Before starting a programme it is absolutely essential that you check that the programme shown in the display is the correct one for the mobile unit being used.

Otherwise inadequate cleaning or disinfection could be the result. Please make sure, that the places assigned for the programmes using Automatic mobile unit recognition are not changed around arbitrarily.

19

Image 19

Miele G 7823, G 7824 operating instructions Automatic mobile unit recognition Optional

Contents

Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Disposing of your old machine Symbols on the appliance Examples of application areas Intended Use Guide to the machine Unclean side Guide to the machine Clean side G 7824 only Display Controls Minus button Door switch Start buttonService interface Programme selector Cursor button right Moves the cursor to the right Water softener softener Optional Setting the water softenerReactivation display Reactivating the water softener Water softener softener Optional Then Run the reactivation programme Automatic mobile unit recognition Optional Mobile unit coding Mobile unit coding strip Setting mobile unit coding Set the programme place coding Protein test Areas of applicationAt the end of each programme Preparing the load Loading the machineUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Loading in an E Baby bottles BCBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application Chemical processes and technology General notes Problem How to resolve it Chemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Orthovario kit Dispensing liquid chemical agentsAdditional optional DOS modules Oxivario kit Fill the containers with the relevant agent Preparing the DOS dispensers Dispensing liquid chemical agents Every 12-18 months Dispensing system maintenanceVenting the dispensing system External Dispensing systems Operation Selecting or changing your own code Operating levels Fixed programme Starting a programmeFree programme selection AWK Automatic mobile unit recognition Programme sequence Cancelling a programme Switching offOperating levels B or D Interrupting a programme Data transfer Periodic checks Maintenance Routine checks Process validation Cleaning the coarse filter Cleaning the filters in the wash cabinet Cleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the door seals Cleaning the control panelCleaning the front of the machine Cleaning the wash cabinet Mobile units, modules and inserts Renewing the paper roll Printer optionalRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extras Description of the machine Special processes Oxivario and Orthovario Areas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366