Automatic mobile unit recognition (Optional)
Mobile unit coding
The automatic mobile unit recognition feature assigns a programme place to a mobile unit. The mobile units must be coded with a magnetic strip (via a Bit combination).
In operating level C, the only programme available for a coded mobile unit is the one assigned to the corresponding programme place.
After a coded mobile unit has been put into the machine and the door closed, the automatic mobile unit recognition system will select the allocated programme.
Make sure that there are no small metallic objects or instrument parts attracted to the magnetic strip, in particular to the underside of it. Any metallic objects on the strip can result in the coding being incorrectly read.
Press to start the programme.
Coding is effected through 5 Bits:
–Bits 1 to 4 define the mobile unit code,
–Bit 5 serves as a control (Parity Bit).
Bit 6 controls the volume of inflowing water and the circulation pump for mobile units with side coupling (WAK). Its settings cannot be altered.
Mobile units without side coupling are coded with tracks which do not contain Bit 6.
20
