Data transfer | Miele G 7824, G 7823 specs

Data transfer

Each machine is supplied with a 5 m long interface cable for data transfer between the Profitronic system and an external report printer or PC.

The interface cable is rolled up inside the machine and must only be connected by an authorised Service Dealer or the Miele Service Dept.

The serial interface is RS 232 compatible.

For the interface configurations see "PC/Printer Function" in the Programming manual.

Various printers can be used as external printers:

–Epson-compatible

(contact Miele for a list of suitable models).

–HP Laserjet.

Pin configuration in the 9-pole sub-D connector on the interface cable:

5GND (base)

3 TXD (transmit)

2 RXD (receive)

1-4-6 (linked)

7-8 (linked)

A standard null-modem or laplink cable can be connected.

The extension cable to the printer/PC must not exceed 10 m in length.

Please note the following when connecting a printer or PC:

–Only use an industry-standard PC or printer (e.g. in Germany TÜV, or VDE approved).

–The size of the printer or PC must be taken into account when installing the machine.

The report printer settings are described in detail in the Programming manual under "PC/Printer function".

48

Image 48

Miele G 7824, G 7823 operating instructions Data transfer

Contents

Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Symbols on the appliance Disposing of your old machine Intended Use Examples of application areas Unclean side Guide to the machine Guide to the machine Clean side G 7824 only Controls Display Door switch Start button Service interface Programme selectorCursor button right Moves the cursor to the right Minus button Setting the water softener Water softener softener OptionalReactivation display Reactivating the water softener Water softener softener Optional Run the reactivation programme Then Automatic mobile unit recognition Optional Mobile unit coding Setting mobile unit coding Mobile unit coding strip Set the programme place coding Areas of application Protein testAt the end of each programme Loading the machine Preparing the loadUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Baby bottles BC Loading in an EBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application General notes Problem How to resolve it Chemical processes and technology Chemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Dispensing liquid chemical agents Additional optional DOS modulesOxivario kit Orthovario kit Preparing the DOS dispensers Fill the containers with the relevant agent Dispensing liquid chemical agents Dispensing system maintenance Venting the dispensing systemExternal Dispensing systems Every 12-18 months Operation Operating levels Selecting or changing your own code Starting a programme Fixed programmeFree programme selection Programme sequence AWK Automatic mobile unit recognition Switching off Cancelling a programmeOperating levels B or D Interrupting a programme Data transfer Maintenance Periodic checks Process validation Routine checks Cleaning the filters in the wash cabinet Cleaning the coarse filter Cleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the control panel Cleaning the front of the machineCleaning the wash cabinet Cleaning the door seals Mobile units, modules and inserts Printer optional Renewing the paper rollRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extras Special processes Oxivario and Orthovario Description of the machine Areas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366