Operation
C. AWK – Automatic mobile unit recognition
Select operating level C.
Push the coded mobile unit into place.
Make sure that there are no small metallic objects or instrument parts attracted to the magnetic strip, in particular to the underside of it. Any metallic objects on the strip can result in the coding being incorrectly read.
Close the door.
Before starting a programme it is absolutely essential to check that the programme shown in the display is the correct on for the mobile unit being used.
Otherwise inadequate cleaning or disinfection could be the result. Please make sure, that the places assigned for the programmes using Automatic mobile unit recognition are not changed around arbitrarily.
Press the Start button .
Programme sequence
The programme will start automatically as soon as the Start button has been pressed. It is finished when
See "System functions" in the Programming Manual for further information on switching off the flashing signal.
Detailed information on programme sequences is given in the appendix of the Programming Manual.
The display background lighting goes out automatically after approx. 15 mins. To bring it back on again press one of the buttons.
On machines with a
45
