Cleaning the coarse, flat and micro-fine filters | Miele G 7824

Maintenance

Cleaning the coarse, flat and micro-fine filters

Remove the coarse filter.

Remove the fine filter (if fitted) from between the coarse and the micro-fine filters.

To unscrew the micro-fine filter, take hold of the two lugs and turn twice in an anti-clockwise direction.

Then remove together with the flat filter.

Clean the filters.

Replace the filters by carrying out the above steps in the reverse order. Ensure that the flat filter sits flat in the base of the wash cabinet.

52

Image 52

Miele G 7824, G 7823 operating instructions Cleaning the coarse, flat and micro-fine filters

Contents

Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Symbols on the appliance Disposing of your old machine Intended Use Examples of application areas Unclean side Guide to the machine Guide to the machine Clean side G 7824 only Controls Display Door switch Start button Service interface Programme selectorCursor button right Moves the cursor to the right Minus button Water softener softener Optional Setting the water softenerReactivation display Reactivating the water softener Water softener softener Optional Run the reactivation programme Then Automatic mobile unit recognition Optional Mobile unit coding Setting mobile unit coding Mobile unit coding strip Set the programme place coding Protein test Areas of applicationAt the end of each programme Preparing the load Loading the machineUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Loading in an E Baby bottles BCBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application General notes Problem How to resolve it Chemical processes and technology Chemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Dispensing liquid chemical agents Additional optional DOS modulesOxivario kit Orthovario kit Preparing the DOS dispensers Fill the containers with the relevant agent Dispensing liquid chemical agents Dispensing system maintenance Venting the dispensing systemExternal Dispensing systems Every 12-18 months Operation Operating levels Selecting or changing your own code Fixed programme Starting a programmeFree programme selection Programme sequence AWK Automatic mobile unit recognition Cancelling a programme Switching offOperating levels B or D Interrupting a programme Data transfer Maintenance Periodic checks Process validation Routine checks Cleaning the filters in the wash cabinet Cleaning the coarse filter Cleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the control panel Cleaning the front of the machineCleaning the wash cabinet Cleaning the door seals Mobile units, modules and inserts Renewing the paper roll Printer optionalRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extras Special processes Oxivario and Orthovario Description of the machine Areas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366