Operation
Interrupting a programme
A programme can only be interrupted in operating level B or D.
If you absolutely have to open the door, e.g. because the load is obviously unstable (conscious intervention):
After interrupting a DESIN disinfection programme, if you wish to continue it please check the message in the display at the end of the programme. If the message
PROCESS PARAMETERS NOT MET is displayed, it means the door was opened after the disinfection part of the programme and the DESIN parameters were not fulfilled. If necessary the programme must be repeated.
In operating levels B or D
Press the Stop button .
The programme is interrupted. CANCEL or CONTINUE< will appear in the display.
Open the door.
On barrier machines please note: If the machine is set to WITHOUT DOOR INTERLOCK - YES the doors on either the clean or unclean side can be opened. If it is set to WITHOUT DOOR INTERLOCK - NO only the door on the unclean side can be opened at this stage.
Caution. Water and items in the machine may be hot. Danger of burning or scalding.
Where a chemical disinfection programme has been used, be aware that steam may contain high quantites of disinfecting agent.
Rearrange the load. Follow infection control regulations and wear protective gloves.
Close the door.
Press the Start button .
The programme will continue.
47
