Automatic mobile unit recognition (Optional)
Mobile unit coding strip
15 different codes can be set. They are assigned to programme places 1 to 15.
Under "System function, Selector switch organisation" the matching programmes have to be put into the first 15 programme places.
Programme | Bit | Bit 2 | Bit 3 | Bit 4 | Bit 5 |
place | 1 |
|
|
| Parity |
|
|
|
|
| Bit |
|
|
|
|
|
|
- | 0 | 0 | 0 | 0 | 0 |
1 | I | 0 | 0 | 0 | I |
2 | 0 | I | 0 | 0 | I |
3 | I | I | 0 | 0 | 0 |
4 | 0 | 0 | I | 0 | I |
5 | I | 0 | I | 0 | 0 |
6 | 0 | I | I | 0 | 0 |
7 | I | I | I | 0 | I |
8 | 0 | 0 | 0 | I | I |
9 | I | 0 | 0 | I | 0 |
10 | 0 | I | 0 | I | 0 |
11 | I | I | 0 | I | I |
12 | 0 | 0 | I | I | 0 |
13 | I | 0 | I | I | I |
14 | 0 | I | I | I | I |
15 | I | I | I | I | 0 |
|
|
|
|
|
|
The coded total must be an even number.
The settings on Bit 6 (WAK) are not included in this calculation.
If the coded total gives an odd number, the message CHECK MOBILE UNIT RECOGNITION appears.
If the mobile unit code equals 0, the message NO MOBILE UNIT RECOGNITION appears. In neither case can the programme be started, The mobile unit recognition function must be
Setting mobile unit coding
To set or alter the coding of a mobile unit with automatic recognition (AWK), proceed as follows:
Unscrew the track with AWK (using an allen key) and remove from the retainer.
Remove the magnetic strip from the track.
21
