Miele G 7824, G 7823 operating instructions Correct application

Models: G 7823 G 7824

1 68
Download 68 pages 4.46 Kb
Page 4
Image 4

Warning and safety instructions

This appliance complies with all relevant legal safety requirements. Please note that incorrect use can lead to personal injury and damage to property.

To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before starting to use it. Keep these instructions in a safe place for reference, and pass them on to any future user.

Correct application

￿This washer-disinfector is designed for use with the applications described in these Operating Instructions only.

Alterations or conversions to the machine, or using it for purposes other than those for which it was designed, are not permitted and could be dangerous.

This machine must only be used for cleaning and disinfecting instruments or medical devices if the manufacturer has stated that they are suitable for machine processing. Manufacturer's cleaning and maintenance instructions for instruments etc. must also be observed.

Miele cannot be held liable for damage caused by improper or incorrect use or operation of the machine.

￿This machine is intended for indoor use only.

￿This machine is not designed for use in mobile installations unless a risk assessment of the installation has been carried out by a suitably qualified engineer.

Please pay attention to the following notes to avoid injury and damage.

￿This machine should be commissioned and then maintained by a Miele authorised and trained service technician only. A Miele service contract is recommended to ensure compliance with GLP Guidelines and the Medical Devices Directive. Unauthorised repairs could be dangerous, for which the manufacturer cannot be held liable.

￿Do not install the machine in an area where there is any danger of explosion or of freezing conditions.

￿The electrical safety of this machine can only be guaranteed if connected to a correctly installed earthing system on site. It is most important that this basic safety requirement is present and tested regularly, and where there is any doubt the on-site electrical system should be inspected by a qualified electrician.

The manufacturer cannot be held liable for damage or injury caused by the lack of or inadequacy of an effective earthing system (e.g. electric shock).

￿A damaged or leaking machine

could be dangerous and compromise your safety. Disconnect the machine from the mains immediately and call the Miele Service Department.

￿Personnel operating the appliance should be trained regularly. Untrained personnel must not be allowed access to the machine or its controls.

4

Page 4
Image 4
Miele G 7824, G 7823 operating instructions Correct application