Selecting the correct temperature

You can make changes to the temperature displays behind the door by pressing the buttons as follows:

–When first pressed, the last temperature selected flashes.

–Each subsequent press of the button adjusts the temperature shown in

1 °C increments.

–Holding the button in adjusts the temperature continually.

Approx. 5 seconds after letting go of the button, the current temperature of the refrigerator or freezer section is automatically shown.

If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full before checking the temperature display as it will take this long for the display to give an accurate reading. If, after this time, the temperature is still too high or too low, you will need to adjust it again.

Temperature range

The temperature can be adjusted:

–In the refrigerator section from 2 °C to 11 °C

–In the freezer section from -14 °C to -28 °C

The ambient temperature in the room and the installation location can affect the time it takes for the appliance to reach the lowest temperature. If the ambient temperature is too high, the appliance may not reach the lowest temperature.

Temperature displays

During normal operation the temperature displays on the control panel show the temperature in the middle of the refrigerator section and the temperature in the warmest part of the freezer section.

If the temperature in the appliance is not within the range that the appliance is able to display (above 0 °C in the refrigerator section, and below 0 °C in the freezer section), bars will flash in the temperature displays.

The temperature displays flash if

–a different temperature is being set,

–the temperature in the appliance has risen by several degrees, indicating that the appliance is warming up too much.

This loss of coldness is no cause for concern in the following circumstances:

–when the door has been left open for a while, e.g., for removing or loading a large amount of food,

–when fresh food is being frozen.

However, if the temperature in the freezer section remains above -18 °C for a long time, check that the frozen food has not started to defrost. If food has defrosted or started to defrost, check that it is still safe to use, and if so, use it as quickly as possible.

20

Page 19 Page 21
Page 20
Image 20
Miele KFN 8995 SD ED-1, KFN 8996 SDE ED-1 installation instructions Temperature range, Temperature displays flash if
Page 19 Page 21

KFN 8996 SDE ED-1, KFN 8995 SD ED-1 specifications

The Miele KFN 8995 SD ED-1 and KFN 8996 SDE ED-1 are premium refrigerator-freezer combinations that represent the pinnacle of German engineering and design in home appliances. These models are crafted with a focus on performance, energy efficiency, and user convenience, making them ideal for modern kitchens.

One of the standout features of the KFN 8995 and KFN 8996 is their innovative PerfectFresh technology. This advanced cooling system creates a dedicated compartment that maintains ideal temperature and humidity levels, extending the freshness of fruits, vegetables, and dairy products. The PerfectFresh zone ensures that food items retain their nutritional value and flavor for significantly longer periods.

Energy efficiency is another key aspect of these Miele models. They are designed with environmentally friendly materials and advanced insulation, achieving outstanding energy ratings. This not only reduces energy consumption but also contributes to lower utility bills for the homeowner. Additionally, Miele’s commitment to sustainability is evident in the durable construction of these appliances, designed for longevity and reduced waste.

Both models feature a sophisticated NoFrost system, which eliminates the need for manual defrosting. The refrigeration section maintains optimal humidity, while the freezer section circulates air to prevent ice buildup. This means that users can enjoy hassle-free maintenance, allowing more time to focus on cooking and enjoying food rather than dealing with chores.

The intuitive user interface, complete with a high-resolution touchscreen display, offers seamless operation. Users can easily control temperature settings, adjust compartments, and monitor energy consumption. Furthermore, the integrated WiFi connectivity allows for remote management via a smartphone app, making it convenient to keep an eye on the appliance while away from home.

The design of the KFN 8995 SD ED-1 and KFN 8996 SDE ED-1 is equally impressive, featuring a sleek stainless-steel exterior that blends seamlessly with contemporary kitchen aesthetics. The spacious interior is intelligently organized with adjustable shelving and versatile storage solutions, ensuring that even the largest grocery hauls can be stored efficiently.

In conclusion, the Miele KFN 8995 SD ED-1 and KFN 8996 SDE ED-1 refrigerator-freezer combinations exemplify the perfect blend of innovation, efficiency, and style. With their advanced features such as PerfectFresh, NoFrost technology, energy efficiency, and user-friendly design, they stand out as premium choices for households that prioritize quality and performance in their kitchen appliances.
Top Page Image Contents