Changing the door hinging
^Using
Do not pull on the cable to remove the insert - you could damage it!
^Remove the stoppers and replace them on the opposite side.
^Replace the cable loop and insert on the opposite side.
^Screw the insert securely into position.
^Fit the covers back onto both sides. Cover A (marked on the underside of the cover) goes on the side with the cable, Cover B on the other side!
^Push the bearing bushing securely into position until there is almost no
gap between it and the top of the door.
Refitting the appliance doors:
^Fit the stoppers into the top of the freezer section door.
^Hang the lower door on hinge pin j and then close the appliance door.
^Fit lower hinge bracket b in the door bearing bushing of the lower door. Then screw it securely to the housing.
^Refit cover a.
^Fit the top appliance door onto middle hinge pin j.
^Open the door.
53
