Changing the door hinging
^Remove the two screws from the top of the bearing block.
^Swing the door out to the side, then lift it up and off.
Refitting the parts:
^ | Unscrew bearing block e. |
^ | Remove cover f. |
^Refit cover f on the opposite side by turning it 180° and then pushing it in from the side. Netx, turn the earthing contact g around and fit it on the opposite side, too.
^Fit the spacer bushings at the back of the bearing block on the opposite side.
^Screw the bearing block onto the opposite side.
^Pull the grey cover on the bearing block forwards (1) and push it into the other side of the bearing block
(2).
51
