Selecting the correct temperature
Temperature display brightness
The appliance is supplied with the brightness of the temperature display behind the door set as low as possible. However, if the door is opened, or a setting is changed or the alarm is sounding, the temperature display behind the door will appear much brighter for approx. 1 minute.
The brightness level of this display can be adjusted:
^Press and hold the SuperFreeze button for approx. 5 seconds.
The SuperFreeze indicator light will flash and a ; will flash in the temperature display.
^Press one of the temperature selector buttons repeatedly until ^ appears in the display.
^Press the SuperFreeze button again.
^lights up in the display.
^You can now adjust the brightness level by pressing the temperature selector buttons. You can choose from settings 1 to 5:
1: lowest setting,
5: brightest setting.
^Press the SuperFreeze button to save the setting.
^To exit the setting mode, press the freezer section On/Off button.
If you do not do this, the electronics will revert to normal operation after 2 minutes.
21