Cleaning and care
^After cleaning, wipe the interior and accessories with a damp cloth, then dry with a soft cloth. Leave the doors open to air the appliance for a short while.
E-Cloth
^A microfibre
Cleaning the ice cube tray (may vary by model)
The ice cubes are formed in a tray before they are dropped down into the drawer.
The tray should be cleaned regularly to remove any stale ice or water.
^Connect the appliance to the electricity supply.
^Press the On/Off button on the ice cube maker. The indicator light will come on.
^Empty the ice cube drawer.
^Press the On/Off button on the ice cube maker and hold for approx. 10 seconds (after about 1 second the ice cube maker will switch off and the indicator light will go out).
The indicator lamp will flash.
^Within the next 60 seconds, push the ice cube drawer in as far as it will go.
The ice cube tray will then rotate into an angled position, which makes it easier for cleaning:
^Wait until the ice cube tray has completed this rotation before continuing.
^Now take the ice cube drawer out of the appliance and clean it.
^Next, clean the ice cube tray with hot water and a bit of dishwashing liquid. Rinse thoroughly.
^Press the On/Off button on the ice cube maker.
The ice cube tray will return to its original position.
^Now put the ice cube drawer back in the appliance and close it.
The ice cube maker will begin to produce ice cubes again after a maximum of 6 hours.
If the ice cube maker has not been used for a while, it is important to clean the ice cube tray before using it again.
36
