Changing the door hinging
Exchange cover h in the middle of the appliance with hinge bracket i. To do this:
^Unscrew cover h and hinge bracket i.
^Pull bearing bushing k upwards out of the hinge bracket and then pull hinge pin j downwards and off.
^Turn the cover and bracket around and screw them securely into the opposite side.
^Replace bearing bushing k into hinge bracket i from above and then push hinge pin j, long side first, from below into the hinge bracket.
Important: When fitting the bearing bushing and the hinge pin, make sure that they both fit correctly in the hinge bracket.
Refitting parts in the upper appliance door:
^Pull the bearing bushing approx. 2 cm out of the door (1).
^Using a screwdriver, carefully remove the covers from both sides
(2).
^Loosen both screws in the insert (see arrows).
52
