Changing the door hinging
The appliance is supplied with a
Check that the appliance has been disconnected from the electricity supply and unplugged. Danger of electric shock.
To change the door hinging, you will need various sizes of Torx screwdrivers, a pair of
Removing the door handles:
First, the side sections of the handles must be removed:
^Pull door handle a towards you. Side section b slides back, creating a gap d between side section b and mounting plate c.
^Place a suitable object (e.g., a spoon handle) in gap d, and slowly pry the handle towards the door.
Be careful not to let the "spoon handle" slip, causing damage to the appliance.
The side section b can now be removed.
^Pull side section b out of the guides on the mounting plate.
^Loosen the 4 screws in the mounting plate, and remove the handle.
^Remove the cover caps from the opposite side, and fit them into the empty holes.
Removing the freezer section door:
^Carefully pry off cover a using a screwdriver.
^With the appliance door closed, unscrew lower hinge bracket b and then take the door down and off.
^Refit cover cap d on the opposite side.
49
