Troubleshooting
Problem | Cause | Solution |
Burner does not burn well | – Burner dirty or moist | – Clean and/or dry the burner |
| – Not suitable for type of gas | – Check identification plate |
|
| and if necessary have the |
|
| appliance adapted |
Ignition sparks but burner | – Burner dirty or moist | – Clean and/or dry the burner |
does not ignite |
|
|
| – Burner cap not aligned | – Position the cap properly |
| properly | onto the ring |
Ignition does not spark | – The appliance has not yet | – Plug in the appliance |
| been plugged in properly | properly |
| – Ignition is defective | – Phone the Miele Service |
|
| Department |
|
|
|
If your appliance does not operate as desired, first check if you can solve the problem yourself by using the table above. There is often a simple reason for the problem.
Repairs to the gas and electrical components of this appliance must only be carried out by a suitably qualified person (licensed gas fitter in Canada).
Repairs by unauthorised personnel could be dangerous and are not covered by the guarantee.
In the event of any fault on this appliance, please contact:
–your Miele dealer or
–the Miele Service Department,
the address of which is shown on the back page.
Please quote the model and serial number of your appliance. You will find both on the data plate located on the underside of the appliance.
10
