Wok burner outer ring conversion
B
A
Outer ring injector (B)
The wok burner outer ring injector is located on the right hand side of the wok burner body (B).
Note
AB
Outer ring airslot (B)
Adjust the air slot on the outer ring injector now. The correct distance for the air slot (B) is 0.083". Slide the brass tube to the prescribed distance and tighten the holding screw at the rear of the tube.
Wok burner inner ring conversion
B
A
| Inner ring injector (A) |
1. Unscrew the screw holding the brass tube to |
|
the left of the injector. Access this screw | The inner ring injector is located on the left |
from the rear. Slide the brass tube to the left, | hand side of the wok burner body (A). |
but do not insert it into the aluminium tube all |
|
the way. |
|
2. Use a 10 mm wrench and unscrew the outer |
|
ring injector. Support the aluminium gas pipe |
|
feeding the injector by holding it down, while |
|
turning the wrench. Unscrew the injector |
|
and replace it with the injector marked 090 |
|
(170, natural gas). |
|
22 |
|
