Pressure regulator conversion
The pressure regulator is located on the gas supply pipe. Unscrew and remove the brass cap in the centre of the regulator. This gas regulator is only adjustable for 4" and 10" gas pressure. There is a blue plastic pin on the inside of the cap, marked "NAT" and "LP". Pull this pin from the cap and insert it the other way round. Snap the pin into the cap. The pin must be positioned as in the drawing above. The regulator is now adjusted for propane gas 10" WC. (For natural gas 4", turn the pin back.) Screw the cap back on the regulator. The pressure regulator is equipped with a separate connection for pressure testing
purposes. Check gas pressure. Permitted
pressures: min. 11" WC (5" WC, natural gas), max.
1/2 psi.
High speed and super high speed burner
conversion
Unscrew and replace injectors on the high- speed and super
Locations of injectors and minimum adjustment screws
(Natural gas) | (034) | (170) | (166) | (145) | ||||||||
LP gas | 007 | 090 | 087 | 075 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LP gas | 054 025 036 040 036 040 | 075 | 087 |
(Natural gas) | (100)(042) (055)(060) (055)(060) | (145) | (166) |
21
