Safety Instructions | Parts |
Warning
This conversion kit must be installed by a qualified service agency.
This conversion kit is for use with Miele gas hob KM 326G only.
Conversion kit
type number AH 102 C4U
These conversion instructions are to be used together with the operating and installation instructions.
Right | Wrong |
Check to ensure that the burner is burning correctly. The flames should be blue and uniform.
Right | Wrong |
This conversion kit includes the following parts:
Part | ID number | Number | |
Burner cap |
| A | 1 |
Injector wok burner |
|
|
|
outer ring |
| 090 | 1 |
Injector wok burner inner ring | 007 | 1 | |
Injector super |
|
| |
burner C |
| 087 | 2 |
Injector | 075 | 2 | |
Low flame screw outer |
|
|
|
wok burner |
| 054 | 1 |
Low flame screw inner |
|
|
|
wok burner |
| 025 | 1 |
Low flame screw burner C | 040 | 2 | |
Low flame screw burner B | 036 | 2 | |
Conversion instructions
Data plate LP gas 10” W.C.
Conversion data plate
This appliance is to be converted to Propane 10” W.C. (2.491 kPa) only.
Input ratings LP gas
. . . . . . . .high speed burner | 7000 | Btu/hr |
super high speed burner | 9200 | Btu/hr |
wok burner inner ring | 1125 | Btu/hr |
wok burner outer ring | 11200 | Btu/hr |
|
|
|
If the flames are not uniform, check to ensure that the burner cap is properly positioned on the ring.
If the flames are irregular and yellow, check to ensure that a pressure regulator has been
installed. Do not use the appliance and inform
the installer.
19
