Timer and Memory function
Timer
The timer can be used for two different functions:
–setting a minute minder
–to set a cooking zone to switch off automatically.
You can set times from 1 minute (01) to 9 1/2 (9.^) hours.
Times of more than 99 minutes (99) are set in
Use the - touchpad to reduce the time from 9.^ to 00, and the + touchpad to increase the time from 00 to 9^.The display stops at 2h and at 99. To continue entering the setting, briefly remove your finger from the sensor and then touch it again.
For all functions, 00 will appear in the Timer/Memory display for a few seconds, while a signal sounds at the same time. If you would like to switch off the acoustic tone early, simply touch the touchpad.
Setting the minute minder
You can set the timer whether the cooktop is switched on or off.
Touch the , - or + sensor.
00 appears in the Timer/Memory display.
Touch the - or + touchpad until the desired amount of time appears, for example 15 minutes.
The time set then counts down in
Canceling the minute minder
Touch the - and + sensors at the same time.
27